Sleep8 CPAP cleaner reviews
Sleep8 CPAP sanitizer is a lightweight CPAP cleaner that quickly gets rid of 99% of germs, mold, and bacteria in as low as three steps! Avoid the higher dangers of becoming sick with a filthy CPAP by immediately cleaning your mask, tubing, device, and more with the power of activated oxygen.
Sleep8 CPAP sanitizer screen is easy but efficiently communicates the cleaning cycle countdown, battery life, and alerts
Simply place your CPAP tool inside the Sleep8 filter bag and click start button, after an hour the Sleep8 CPAP cleaning tool will immediately turn off , leaving you with fresh, sanitized CPAP machine for immediate use. By using ozone or activated oxygen to sterilize your CPAP without using hazardous chemicals and your CPAP water chambers, masks and hose at one time.
Main Features of Sleep8 CPAP cleaning tool
Developed to work as both a home and a travel unit
Sealed cleaning chamber and several 1 way flapper valves collaborate to prevent ozone from leaking directly into the room
High quality charge controller that keeps the convenience of a portable unit, but enables you to leave it plugged in while in your home.
Easy one button click to clean
Safety turned off prevents unit from running when not connected properly.
Benefits of Sleep8 CPAP cleaning tool
Extremely quiet
Portable
Can be used even while charging
Extremely easy to operate
Practical
How does Sleep8 CPAP cleaning tool Works?
1.) Connect CPAP Tubing Inside the Bag. Put in Mask and Chamber and Zip it Closed: Unzip the bag and find the round valve inside. Remove the tubing from your CPAP device and attach it to the valve. Put all CPAP tubing, mask and dry water chamber inside the bag and zip it closed.
2.) Connect Sleep8 Outside the Bag: Slide the Sleep8's triangular shaped port onto the triangular shaped valve on the outside of the bag. It should be a snug fit. The device will only work if there is a secure connection.
3.) Press Start and Relax: Press the power button up until you hear a beep and see the Sleep8 screen light up. The screen will count down up until the sanitation is complete. It is typical to hear the fan osculate and pause for short periods. When it is done it will turn off immediately.
What's inside the box?
Sleep8 CPAP cleaning tool
Sleep8 Sanitizing Filter Bag
This item is a replacement sanitizing filter bag for the Sleep8 CPAP cleaning tool.This bag should be replaced every 3 months if the patient is using their Sleep8 daily. One end of the CPAP tubing is connected to the valve inside the sanitizing bag, and the tubing, mask, and humidifier chamber (if any) go right inside also.
Micro USB Charger
Sleep8 USB charger charges the Sleep8 CPAP cleaning tool to offer a cord-free way to naturally clean your CPAP tool in under an hour. Keep your Sleep8 CPAP cleaning tool going by only using this safe and approved charger.
Sleep8 CPAP cleaning tool is developed for benefit with an extremely quiet motor that won't disrupt your partner and is battery operated. Its compact design makes it easy to travel with, so you don't have to settle for a stinky mask on vacation. Take the step towards simple, cleaner sleep with your new Sleep8 CPAP cleaning tool tonight!
read more →
Sleep8 CPAP cleaner vs Soclean
Sleep8 CPAP cleaner vs Soclean
Sleep8 CPAP cleaner is an extremely cutting-edge CPAP device cleaner and sanitizer. You can utilize it to correctly sterilize any type of kind of CPAP or BiPAP gadget. Utilize the system in order to sterilize your mask, the tubes as well as also the water chamber of your machine. Sleep8 CPAP cleaner functions a large-sized unique bag where you require to place all the CPAP components that you want to sterilize.
Sleep8 CPAP cleaner features
- Easy procedure- just connect the main system to the bag and press the begin switch
- Safe and extremely quick steralization procedure for your CPAP devices
- Extremely easy to use style as well as procedure
- Eliminate germs as well as virus that live inside your tubes mask or water chamber
- Compatable with both warmed and non-heated tubes systems. You do not require any type of unique adapters and you obtain high quality cleanliness with simply one click. Sleep 8 sterilizes utilizing the power of pure Oxygen- by producing Ozone.
Soclean CPAP cleaner
SoClean 2 is an automatic CPAP cleaner as well as sanitizer. You can utilize the SoClean 2 to clean as well as sterilize various components of your CPAP devices such as the tubes, mask, or the humidifier chamber without really taking apart anything. You do not need to utilize water or any type of cleaning agent to sterilize your devices utilizing the So Clean 2.
Sleep8 and Soclean CPAP cleaner
Both SoClean 2 and Sleep8 CPAP cleaner are automated CPAP cleaner as well as sanitizers, with the primary distinction that for the SoClean device you require to utilize an unique adapter for some CPAP designs. Likewise, Sleep 8 includes a global filter bag, while So Clean 2 has a global chamber that fits all various kinds as well as dimensions of masks as well as CPAP devices.
read more →
Sleep8 CPAP cleaner FAQ
Sleep8 CPAP cleaner - Frequently Asked Questions
Q: Can an HSA or FSA account be used?
A: Yes, you can use your HSA or FSA account. We are payable under 9274.
Q: Is Sleep8 covered by insurance?
A: At this time, Sleep8 is not covered by insurance. On the other hand, you can use your HSA/FSA accounts under code 9274 for payment.
Q: Can Sleep8 be used to sterilize the water chamber?
A: Yes indeed. If the water chamber is easily removed and dried, it can be added to the filtered bag for sanitizing.
Q: Is ozone safe?
A: Yes. When ozone, or "activated oxygen" comes in contact with the air it immediately dissipates. When it is concentrated and safely contained within the Sleep8 bag, it operates as a sanitizing agent to wipe out live bacteria and any living particles things. For your protection, the Sleep8 unit will only work when the Sleep8 filtered bag is correctly attached, and the filtered bag must be changed every 3 months.
Q: Why is there a "clean" scent on my mask after sterilizing?
A: The "clean" smell that is in some cases described as very similar to the scent air after a heavy rain or thunderstorm. In-fact the scent in both cases is triggered by ozone. Ozone happens naturally after lightning storms, and is also the sanitizing agent we utilize. If you do not like the smell, just let the tube sit outside the bag for a while. Further, you can run your CPAP for a few minutes before you put it on to additional minimize the scent.
Q: What is covered under the Sleep8 guarantee?
A: The Sleep8 unit guarantee covers manufacturer problems for 18 months; the charger guarantee covers manufacturer problems for 1 year; and the bag guarantee covers manufacturer problems for as much as 3 months.
Q: Should I wash the Sleep8 bag?
A: If the bag becomes soiled, you may wipe it clean with a dry cloth. The bag includes a filter that must be kept dry. The Sleep8's activated oxygen system completely sanitizes whatever is in the bag, in addition to the interior of the bag itself.
Q: For how long can I use the filtered bag?
A: Sleep8 suggests changing your bag when you change your CPAP materials, or every 90 days.
Sleep8 CPAP cleaner Manual
Sleep8 CPAP cleaner Manual
Make certain your mask has actually been wiped and clean to eliminate any type of noticeable dust or oils, before utilize. Unzip the gab as well as discover the round white shutoff inside. Remove the tubes from your CPAP device as well as connect it to this valve. Place all CPAP tubes, mask, pillows, as well as completely dry water chamber inside the bag. After that close the Sleep8 bag .
Move your Sleep8's triangular port on the triangular valve outside of the bag. Ensure to match the blue dots on the gadget as well as the bag's port. They need to fit snuggly with each other. The gadget will just function when there's a safe and secure connection. Once again ensure the bag is totally zipped closed.
Press the power switch up until you listen to a beep as well as see the Sleep8 display lightup. The display will certainly count down up until the sanitization is full. It's typical to listen to the fan oscillate as well as stop briefly for brief durations. When done, your Sleep8 will immediately shut off. The bag needs to be left shut for 1 hr after the cleansing in finished. Later, unzip the bag to discover your sterilized CPAP devices prepared to utilize.
read more →
3B Lumin CPAP cleaner reviews
3B Medical Lumin CPAP cleaning device
Lumin CPAP cleaner tool is the simplest and fastest way to sanitize a CPAP mask and accessories. Lumin CPAP cleaner tool works with a disinfection cycle time of 5 minutes, ozone free, and wipe out 99.99% molds,germs and bacteria. Lumin CPAP cleaner device uses a strong UV light to kill 99.9% molds,germs and bacteria present on your CPAP.
Lumin CPAP cleaner tool takes only five minutes to complete its sanitizng cycle. It merely requires you to quickly wipe down your mask or water reservoir, place it into the Lumin's cleaning chamber, and turn it on with a press of a button. Just a short time later, the Lumin CPAP cleaner tool will chime, suggesting that your equipment is clean and prepared for immediate use.
How Does 3B Lumin CPAP Cleaner Device works?
Lumin CPAP cleaner tool operates using a specialized high powered germicidal UV bulb. The drawer is made of polished aluminum which reflects the Ultra violet light to improve coverage. Ultra violet disinfection is effective on wipe out 99.99% molds,germs and bacteria and is well fit for keeping your CPAP mask and humidifier free from bacteria that can make you sick.
Daily use of the Lumin CPAP cleaner tool will help keep you healthy and compliant with your CPAP equipment. Since the Lumin CPAP cleaner tool operates using a type of high energy light, it is extremely efficient in sanitizing your CPAP accessories.
To keep your mask, hose pipe and water chamber clean and reduce the danger of infections, we suggest using Lumin CPAP cleaner tool twice weekly on your mask, water chamber and hose. A taken apart mask can be put in the Lumin CPAP cleaner tool for a much more comprehensive disinfection.
Benefits of Lumin CPAP Cleaner Machine
Safe and Easy to Use : The 5 minute ozone FREE cleaning cycle with no need for water or hazardous chemicals.
No Hazardous Ozone :Using UV-C is environmentally friendly, leaves no residue or toxic gases or chemicals.UV-C systems are currently in use to sanitize ambulances, emergency service and other high touch areas.
Reliable :Ultraviolet light will sanitize approximately 99% of hazardous mold, bacteria and virus that can cause infection and disease. UV light is also the best disinfection choice on the market, there is no hazardous OZONE.
Budget-friendly :
Lumin CPAP cleaner tool budget-friendly at less than other brands. A healthy CPAP experience should be cost effective for everyone.
No Maintenance is needed :Lumin CPAP Cleaner Device requires no special care of maintenance and there are no parts that need to be replaced on an arranged basis. The high powered UVC light bulb was developed specifically for the Lumin CPAP cleaner tool and produces a high-powered disinfection wavelength of light and outlast the life of your device.
Multi-purpose :Lumin CPAP Cleaner Device is also a general-purpose disinfecting tool and can sanitize any item placed in the drawer. You can keep it on your bathroom counter and sanitize any essential items such as your infant pacifiers,hearing aid, dentures, and anytoys .
Summary
Lumin CPAP cleaner tool is a wise investment for anyone who needs to preserve CPAP equipment clean and sanitized.
Resources :
https://s3.amazonaws.com/snoringcenter/cpap-cleaner/3B-Lumin-CPAP-cleaner.html
read more →
Lumin CPAP cleaner FAQ
Lumin CPAP Cleaner - Frequently Asked Questions
How does Lumin CPAP cleaner work?
Lumin works by releasing high energy light within a narrow spectrum described as UV-C. The Lumin CPAP cleaner depends on a low-pressure, mercuryarc germicidal light developed to produce the highest amounts of UV energy-- where 90% of energy is produced around 254nm. This light is extremely near to the peak of the germicidal efficiency curve of 265nm, the most deadly wave to bacteria. The dosage of UV-C released in one 5 minute cycle suffices to eliminate most germs and mold on a surface area. Using UV-C is eco-friendly, leaves no residue or harmful gases or chemicals. UV-C systems are presently in use to sanitize running spaces, ambulances, emergency service cars and other high touch places.
Why does not the Lumin use Ozone, like other CPAP sanitizers?
Devices and masks, we have actually an increased level of dedication and issue for our clients since 3B Medical is a manufacturer of CPAP devices. We did not feel that the security issues of ozone being utilized in the house were being properly revealed. Due to the way of lives of a lot of our clients, we likewise had issues that the two hour wait period in using CPAP devices might be disregarded and hazardous OZONE breathed in. The U.S. EPA released a major caution about use of ozone in a house environment: "When breathed in, ozone can harm the lungs. Fairly low amounts can trigger chest discomfort, coughing, shortness of breath and throat inflammation. Ozone might likewise intensify persistent breathing illness such as asthma and jeopardize the capability of the body to combat breathing infections."
Why should I sanitize my mask and water chamber?
Humidity left in your mask or humidifier ends up being a breeding place for germs, bacteria and mold. Keeping your CPAP mask and humidifier without hazardous bacteria and germs assists prevent getting ill from an unclean CPAP.
Are there any products that require to be reordered?
No. The Lumin needs no replacement materials whatsoever. The Lumin depends on an unique germicidal UV-C bulb that is rated to quickly outlive the life of the unit and ought to not need replacing. In case the bulb is harmed or does need replacement, low cost replacement bulbs are offered straight from 3B Medical.
How do I utilize the Lumin CPAP cleaner?
The Lumin CPAP cleaner is a single button unit. It truly might not be any simpler. Clean the within of your mask and cushion with a CPAP clean to eliminate any physical residue. Open the chamber and location in the drawer face up if sanitizing your humidifier water chamber. Lay your mask in the drawer face up if sanitizing your mask. Close the drawer and press the button. In 5 minutes the cycle is total and your mask and water chamber are ready for use. Since UV-C disinfection includes light waves, it runs in "line of vision" style, just irradiating surface areas within its sightlines. The mask can be taken apart or a 2nd cycle utilized after turning the item over if there is increased requirement for disinfection. For basic everyday use, only one cycle is required.
What's the SERVICE WARRANTY for Lumin CPAP cleaner ?
Your Lumin CPAP cleaner is required for a period of 2 years from time of purchase to be devoid of manufacturer flaw or workmanship. Ought to you experience a guarantee problem please contact 3B Medical at www.3 BLumin. com to send a return authorization or e-mail support@3bproducts.com. It is at the discretion of 3B Medical to fix, change or exchange your Lumin CPAP cleaner system ought to it be required. 3B Medical is not liable for misuse, mishandling or breach of this composed assurance. Efforts to change the Lumin CPAP cleaner in any way will void guarantee.
read more →
Lumin CPAP cleaner Manual
Lumin CPAP cleaner Manual
Lumin CPAP cleaner is a device intended to disinfect Continuous Positive Airway Pressure (CPAP) accessories, including mask and water chamber. A person using a PAP device to treat Obstructive Sleep Apnea (OSA) may use Lumin CPAP cleaner to sanitize their mask and water chamber to augment their PAP equipment manufacturer’s recommended cleaning instructions. Lumin CPAP cleaner is intended for home use. The Lumin may also be useful as a multi-purpose disinfecting device for other personal care products (i.e. electric toothbrush, toys, cell phones, etc).
Using your Lumin CPAP cleaner
1. Plug the Lumin power cord in a wall outlet.
2. For your humidifier water chamber, open the water chamber and lay both sides facing up. For your CPAP mask lay the mask with the inside facing up and laying flat for maximum UV penetration
3. If your mask or accessories are visibly soiled please first wipe thoroughly with a damp cloth or a CPAP wipe.
4. Close the Lumin chamber drawer
5. Press round power button, the Cycle-On red light will turn on indicating that the 5 minute disinfection cycle has started.
6. A light glow of UV Light will be visible through the tinted oval window on the top of the unit while disinfection is occurring
7.After 5 minutes the Lumin will emit a beep and the UV light will no longer be visible. A green light will indicate completion of the cleaning cycle. You may now remove your equipment. No waiting period is necessary and your mask and equipment are now ready to use.
read more →
Lumin Bullet FAQ
3B Lumin Bullet – FAQ
What is the 3B Lumin Bullet CPAP Hose sanitizer ?
Lumin Bullet is developed to sterilize your CPAP hose.
How does 3B Lumin Bullet work?
3B Lumin Bullet works with a powerful LED that emits ultraviolet light. That light is reflected 360 ° to reach every area of your CPAP hose. The hose interior only requires 1 second of exposure to be cleaned.
Does 3B Lumin Bullet attach to the Lumin?
The 3B Lumin Bullet is a stand alone device. The original Lumin unit is NOT needed to use the Bullet.
Does 3B Lumin Bullet require batteries?
No. The 3B Lumin Bullet works off of a USB charger. When completely charged the Bullet will glow green, suggesting it's ready to use. Your completely charged Bullet will last as much as 30 uses.
Which way do I insert the bullet inside the hose so it stays in place?
The Bullet is developed with magnets inside. When the Bullet is inserted into the hose, "nose" first the correctly located magnets will "grip" on to the Bullet. Making sure that your hose is stable.
Do I get a price break with the purchase of both the Lumin and Lumin Bullet?
Yes, bundle deals are offered.
What is the guarantee? and what does it cover?
The 3B Lumin Bullet is covered under guarantee for a period of 1 year from purchase. We guarantee your Bullet unit to be free from problems for this time period.
How do you clean the 3B Lumin Bullet ?
The Lumin Bullet and the outer shell may be wiped with a clean lint totally free cloth. Please do not submerge parts into water. If extra cleaning is needed a moist cloth and mild soap may be used to eliminate grime.
How should I keep the 3B Lumin Bullet to not run down it's charge or lose the Bullet element?
Always put the Bullet inside the clamshell case for security. Close the clasp and store in a dry area. The magnets will "grip" the Bullet and keep it safely inside the housing.
Is 3B Lumin Bullet compatible with every CPAP hose?
Lumin Bullet is widely compatible for use on a lot of popular CPAP tubing brands. The Lumin Bullet, however, is not compatible with the ResMed ClimateLineAir ™ Heated Tube for AirSense ™ 10
Why is the blue light blinking?The UV LED operates at a wavelength that is not visible to the human eye. A second blue sign light flashes to let you know that the 3B Lumin Bullet is working.
read more →
Lumin Bullet Manual
Utilizing your Lumin Bullet CPAP Hose cleaner
Lumin Bullet CPAP Hose cleaner runs utilizing a specialized high powered germicidal UV LED. UV disinfection works on germs, infections, mold and fungis and is well fit for keeping your CPAP tubing devoid of pathogens that can make you ill. CPAP hoses touch with warm damp air throughout the night, the perfect environment for reproducing germs. Use of the Lumin Bullet CPAP Hose Sanitizer will assist keep you certified and healthy with your CPAP devices.
1. Charge Lumin Bullet CPAP Hose cleaner by plugging in USB cable to bottom of BULLET.
2. The BULLET will glow RED while charging, and GREEN when completely charged.
3. Take away BULLET and put inside CPAP tubing so there suffices tubing hanging over to pull the tubing.
4. Put BULLET in shell, you will feel the magnets get the BULLET.
5. Close shell and slide clasp up until the shell locks, your BULLET is now triggered.
6. Pull the tubing all the way to the right, then back to the left, guaranteeing you cover the whole length of tubing two times, this procedure needs to take 30-60 secs for ideal disinfection.
7. Take away hose from BULLET, it is now all ready to utilize.
read more →
Lumin vs Soclean
3B Lumin CPAP Mask Cleaner VS Soclean 2
3B Lumin CPAP mask cleaner is different from the SoClean 2 in that it uses a UV light source to clean and disinfect your CPAP equipment. This UV light sanitation system is not new, yet it is not extremely typically found in home sanitizer units and cleaners. UV light is capable to ruin mild, bacteria, viruses and even a number of types of fungi that might reside inside your tubing or other parts of your CPAP equipment.
Soclean 2 CPAP cleaner
SoClean2 is yet another CPAP cleaner and sanitizer that manages to kill 99.9% of the viruses, germs and bacteria residing within your CPAP equipment. Use it to sanitize your reservoir, mask or hose without water or added severe chemicals. You do not even have to take apart your equipment in order to sanitize it perfectly. This saves you a lot of time, and you can delight in clean and sanitized CPAP therapy with each session.
Do I need a Replacement part ?
3B Lumin CPAP mask cleaner also represents an extremely affordable service, since there are no replacement parts, filters or any solutions/detergents that you need to buy. UV light will kill 99,99% of all the bacteria and fungi that represent a high degree of danger to your health. Using your CPAP equipment on a day by day basis, you should ensure it is totally clean and disinfected each time you start your treatment session.
The 3B Lumin CPAP mask cleaner does not require any replacement parts or ongoing maintenance. The ultraviolet bulb can be replaced but is meant to last the lifetime of the Lumin. The machine weighs 5.5 pounds and steps 12.25" L x 8.5". But SoClean requires replacement filters at $30 every six months. The device weighs 6 pounds and steps 7.5" L x 6.5" W x 8.5" H. Each device includes a pre-wash bottle, cartridge filters, check valve assembly, one-slot plug-in, and ac power adapter.
How Much Does it Cost ?
3B Lumin CPAP mask cleaner and SoClean 2 have one thing in common they are great CPAP cleaning devices! You truly can not go wrong with any of these CPAP cleaners.Both of these machines are praised by clients and both have a 30 day risk-free trial, money-back assurance. The only thing that truly sets these two cleaners apart is cost. The 3B Lumin CPAP mask cleaner is somewhat less expensive at a cost point of $249, whereas the SoClean 2 is priced at $319.
read more →